Combination Suction/Jetting Tankers
The addition of a vacuum sludge tanker facility to a traditional high pressure water jetting system dramatically increases versatility when dealing with sewer pipe blockages, simply by making the whole cleaning process a far more efficient exercise.
From the demountable mini low volume jetvac mounted on a 3.5 ton flatbed or trailer to a 26 ton six wheeler chassis mounted high volume tanker, Buckingham's offer the full range of jetting performances, where the water & sludge produced whilst actually jetting are removed, either on a temporary basis until the blockage is cleared, or taken away from the site completely in the tanker. From power wash performances, then upward to cleaning 4” diameter branch or interceptor lines, & finally to main sewers, a full range is offered to suit operator requirements. If required, optional tipping & gully boom additions can enhance versatility still further.
From low volume packages upwards …tankers that collect as they jet!
Non hazardous vacuum cesspit or sludge tankers as described before, now with the add-on of a separate HD plastic water reservoir tank or as a separate compartment split within the vacuum tank barrel, feeding usually a triple piston high pressure water pump driven via a separate diesel or petrol engine, or PTO. This high pressure water is then delivered via an unloader safety valve and filter to a manual or hydraulic operated hose reel containing high pressure hose of varying lengths with bore’s ranging from 3/8” to 1/2” to 3/4” to 1”. The appropriate jetting nozzle or hand lance is then attached for work. The lance & two base jetting nozzles are usually included as standard with further optional nozzle selections available.
1,050 litre, 3.5 ton rated Mini Jetvac
Demountable 800 litre waste & 250 litre water tanks, electric start petrol engine vacuum & jetting pumps. Jetting pump rated 2,000 psi @ 8 galls/min, vacuum pump rated 1,000 lit/min free air, 100’ of 1/2” bore jetting hose plus filling hose, nozzles & hand lance, 3” inlet/out sludge valve with suction hose lengths to suit. Trailer is optional.
7.5 ton 4x2 chassis mounted 3,000 litre Medium Volume Suction Jetter
50:50 water/sludge compartment split, PTO driven pumps - 200 cfm rated exhauster & 28 gall/min @ 2,000 psi jetting, hydraulic rear door & hose reel with 80m x 3/4" bore hose 3” inlet/outlet sludge valves etc.
10 ton 4x2 chassis mounted 5,000 litre Low Volume Combination Suction Jetter with Gully Boom
Optional stainless steel barrel including a 500 litre compartment for water, PTO driven pumps - 200 cfm rated exhauster & 10 gall/min @ 2,000 psi jetting, hydraulic hose reel with 60m x 3/4” HP bore hose, 3” inlet/outlet sludge valves & top mounted 3” bore top Gully Boom with spring assistance & pneumatic valve.
18 ton 4x2 chassis mounted 9,000 litre Medium Volume Combination Suction Jetter
Compartment split of 8,000L for sludge & 1,000L for water, PTO driven pumps - 200 cfm rated exhauster plus 22 gall/min @ 2,000 psi jetting, hydaulic rear door, hydraulic hose reel with 80m x 3/4" bore hose, 4” inlet/outlet sludge valves, vice, equipment storage lockers, jetting nozzles, hand lance, work lights & beacons, lengths of suction hose.
26 ton 6x2 chassis mounted 14,000 litre Low Volume Combination Suction Jetter
Compartment split of 13,000L for sludge & 1,000L for water, PTO driven pumps - 360 cfm rated exhauster plus 10 gall/min @ 2,000 psi jetting, hydaulic rear door including clamps, hydraulic hose reel with 100m x 1/2" bore hose, 4” inlet/outlet sludge valves, all on/off controls at rear, long suction hose trays, equipment storage lockers, hand lance & nozzles, work lights, beacons, vision alert flashes, sign boards etc.
